[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

RE: [T3] Pressure Sensor


>#1 is for a 68-9 type 3
>#2 is for a type 4 or Porsche 914

>They are not interchangeable. Neither is correct for your '71 type 3.
>To the right person, they both have value, especially if the adjustment screws 
>in the end have not been tampered with (ie are still covered with the epoxy.)

>You should put a clean hose on them and suck on each one to verify that they 
>still hold vacuum. Even if they leak, I might still be interested in them for 
>parts.


#2 022 906 051 does have a larger adjustment screw sealed 
with an amber cover, I guess this is the epoxy.

#1 311 906 051B the adjustment screw is accessible, no cover.

I'll try the test.

Gary



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]