[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] High Beams not working


On 20/1/05 12:18 PM, "BOB2TYPE3S@aol.com" <BOB2TYPE3S@aol.com> wrote:

> Ground the brown wire with a white stripe. If this makes it work, check the
> plug at the base of the column head, or the wires going to and from the column
> head, as it's possible for one of them to be chafed. If that's ok, then you
> might need to adjust the gap between the column head and the steering wheel. I
> hope this helps.
> 
> 

Thanks Bob, I will try this when I get off work.  What about a relay, is
there an actual relay for the high beams?  The high beams used to work about
a month ago, then when I tried it a few days ago they will not click on.  I
already removed the turn signal indicator unit and checked wiring , etc.
when I pull the lever it makes a connection with the connector.  The wires
seem OK from the head to the base of the steering column.  I will try
grounding them to see what happens.

Petri
71 Notch




~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]