[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On Wed, 2005-02-16 at 23:45, Hal Sullivan wrote: > At 07:19 PM 2/16/05, Russ Wolfe wrote: > >I don't remember if T-1 and T-3 used the same bent end or not. > >http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=4528094127&rd=1&sspagename=STRK%3AMEWA%3AIT > > I didn't think the T1's used the "bent end", but you got me > curious, so I went looking .. the T1 driver inner is "bent", > and the illustration for the TRW part shows much more of > a bend than Ithe ebay-ed picture shows. That one might > actually be a T3 end .. > > But the T1 and T3 bent ends are different.. > Yeah, after I posted that, I noticed in the parts book, that our ends go on the pitman arm from the bottom. So that bend is the wrong way. -- Russ Wolfe '71 FB AT '66 FB MT '64 T34 (not running) '65 T1 (not running) russw@classicvw.org http://www.classicvw.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~