Re: [T3] FI Harness

[Mark Healey <marksvw@healeyonline.com>]

<x-flowed>Constantino Tobio wrote:

> On the subject, the real reason I picked up the harness is because I
> am considering someday assembling my own and using this one to reverse
> engineer a bit.

It's time consuming and having Bently helps.  Do it in front of the TV.

 Does anyone have a source for the connectors?

I have the connector pins, for the ECU end and most of the component 
ends, injectors, TVS, MPS, dist, etc.  I don't have the ones that can be 
easily picked up at a good electronics shop (Radio Shack doesn't count). 
 I'll sell 30 of each for U$12.00.  That would include first class 
shipping in the U.S..

You'll have to re-use the plastic housings of the connectors and other 
misceleanous bits like the grommets.  You'll also need a good molex type 
crimper, the racheting-paralell type.

 I can
> imagine the 25 pin ECU connector is scarce, but the other stuff should
> be findable, right?

During the internet boom days when everyone had money to burn I bought 
an entire run of each type from Amp (now something else).  That was the 
only way to get them.  I have scads of them.



--
Mark Healey
marksvw@healeyonline.com

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

</x-flowed>