[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] Rear heaterbox seals


On 16 Aug 2005 at 22:06, Keith Park wrote:

> I put the manifolds back on my SP heads on the Crate motor, and used the new
> copper rings from the gasket kit.
> 
> Have I been using the carb copper rings for my rear heater boxes all these
> years?

I doubt it. The single port copper rings are much smaller than the exhaust 
ones. The exhaust ones almost fill the ID of the female thread in the HE boxes.

-- 
*******************************
Jim Adney, jadney@vwtype3.org
Madison, Wisconsin, USA
*******************************

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]