[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
If you can wait, I have a couple beams that I need to cut to get them out. Im not sure when Ill have time to do this though. Keith > OK, let me clarify, I need the upper torsion arm bushings replaced. > or a rebuilt beam. > > > > Quoting "Schlegel, Richard" <RSCHLEGEL@OCSD.COM>: > > > I just did my '70. I got all my parts from CIP1 > > http://www.vwcalimports.com/ and VeeDub parts http://vwparts.net/. I > > just posted pictures of the rebuild. No special tools that I can > > remember. I did use a pickle fork to separate a few of the tie rod ends. > > > > > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > Rich & Nicole (Daughter), Orange County, CA > > 70/71 SquareBack 1600 FI MT > > http://community.webshots.com/user/schlegelr > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > > > > > -----Original Message----- > > From: john.fischer@stickergiant.com > > [mailto:john.fischer@stickergiant.com] > > Sent: Wednesday, April 27, 2005 12:41 PM > > > > The front end in my '69 type 3 is shot it needs a rebuild. > > where can I get the parts and or tools or even better yet a complete > > new/rebuilt front end? > > thanks, > > john fischer > > > > >