[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] Notch height


On 26 Apr 2005 at 20:49, Keith Park wrote:

>     I then "Lowered it" using the poor man's method, adding 100lbs to the
> front of the trunk and got the lower arm to just kiss the lower snubber...
> (no suspension travel left).  I then have 11.5" from the front bumper to
> ground, 5 3/4" from the clamp to ground and 1 1/4"  from the fender lip to
> the top of the tire... which gets your hand slid in on top of the tire where
> Jim A suggest's the height should be.

Wow, sure seems strange....

The only thing that I can think of is that somehow this body, or just the nose, 
is sitting high on the front axle beam. I can go outside in a couple of days 
and measure from the ground up to the bottom of an beam clamp, but I'd say that 
5.75" sounds pretty low, which is consistent with your snubber observations.

I checked to make sure that they didn't change the beam clamps when they 
introduced the late body, and they didn't.

-- 
*******************************
Jim Adney, jadney@vwtype3.org
Madison, Wisconsin, USA
*******************************

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]