[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] Returning my Squareback to stock ride height


Yep!  Big smile!  Generally  I set them so that the upper bar is just off
the upper snubber a bit, that gives plenty of travel for the lower arm.
There is a setting for the angle but the bars have all settled out after all
these years and  that number wont usually give you the correct end result.

Keith


> All,
> I know Brian Fye wouldn't approve, but given Ithaca NY's "lovely"
> roads, I'm looking to raise my Squareback back to a "stock" ride
> height. (I can hear Keith and Jim cheering from here.)
>
> It was lowered by a PO, and it's currently sitting on the snubbers in
> the front. What would the stock height be? Is there a "standard number
> of notches"?
>
> Thanks
> -lilmatt
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
>



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]