[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] AT Tinware & Balance Pipe


On 8 Apr 2005 at 10:11, Daniel Baum wrote:

> This is my dual-carb AT balance pipe. As far as I know it is an original 
> part:
> 
> http://www.type34.info/temp/balance%20pipe.jpg
> 
> The two ends connect to the manifolds, and the center pipe goes down to the 
> vacuum modulator.

Wow, I certainly didn't expect to see that long branch to the VM. I expected it 
to be short and to use a long hose. How long does your hose end up being?

> This is my front tin. As you can see it is slightly the worse for wear, but 
> you can see the notch that surrounds the balance pipe where it goes down to 
> the AT:
> 
> http://www.type34.info/temp/front%20tin.jpg
> 
> Is it the same as the FI version?

As far as the notch for the VM pipe goes, I THINK it looks just the same. The 
FI front plate would have an extra hole on the right for the fuel pressure 
regulator/fuel return line.

-- 
Jim Adney
jadney@vwtype3.org
Madison, WI 53711-3054
USA

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]