[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 7 Sep 2004 at 20:03, Joel Briglia wrote: > I spent a good 3 hours removing everything that was keeping me away from the > oil cooler. I removed all of the screws holding the shroud except one. It's > undeneath the car with the head facing up. Yes, these are hard to get to. On engines that have been together for a long time, I usually need to heat the nuts with a torch to get the bolts to free up. This always works, BUT you MUST be careful not to torch the gas lines. BE CAREFUL!!! -- ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~ Shameless link for search engines: http://listarchive.type3.org ~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~