[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] Fitting a Type 1 case into Type 3


On Tue, 2004-10-26 at 08:41, Jim Adney wrote:

> 
> > I do have a 6V flywheel here to fit on a late crank luckily.
> 
> That won't work. The nose of the late crank won't accept it.

Yes it will work Jim, The early flywheel will fit the late crank but the
late flywheel wont fit the early crank. The o'ring flywheel will fit if
you machine a few thousandths out where the o'ring shoulder is.
I just put all my extra cranks up in the attic of the shop or I would
take a picture.

-- 
Russ Wolfe
'71 FB AT
'66 FB MT
'64 T34 (not running)
'65 T1 (not running)
russw@classicvw.org
http://www.classicvw.org

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]