[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
<x-flowed>I ended up finding a rubber electrical bushing with a 1/4" ID and running a piece of tubing through it. With a short piece (just the width of the hose clamp) of tubing on either side clamped in place, I have a fitting that is flexible, yet won't rub against any metal. I put another in-line shut-off valve on the body side as well.
I can shut off the fuel line, disconnect the tube from the engine side, and remove the engine with ease.
I'll post a pic of the assembly.
Jeff '67 Sqbk
On 18 Oct 2004 at 13:17, knowonelse wrote:
> Thoughts on where should the fuel line go? Use one of those 3/8" threaded bushings that are used in lamp fixtures and then solder a length of copper tubing into it.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:email@example.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~