[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
<x-flowed>On the left side of the vertical tin in front of the engine (FIF) is a hole that would appear to be for fuel line routing. However, the hole in directly in line with the tin surrounding the left cylinders. So from that perspective it would not make a good place to a route fuel line since the line would have to make such an abrupt direction change. This tin is the piece that is attached to the engine and other tin.
In the body above this area are two holes in the body work. One provides metal for a triangle of metal to be used to hold down the wiring harness going from one side to the other.
The other is unused, and would make a good place to run a fuel line, with a grommet, and a hard line through the grommet or course.
Thoughts on where should the fuel line go?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~