[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] Clutch cable


On Fri, 2004-10-08 at 08:43, Jim Adney wrote:

Remember Jim, He is down under in OZ. RHD.

-- 
Russ Wolfe
'71 FB AT
'66 FB MT
'64 T34 (not running)
'65 T1 (not running)
russw@classicvw.org
http://www.classicvw.org


> 
> The steps are pretty much the same:
> 
> 1) Disconnect and remove everything at the rear: wing nut & Bowden (flex) tube.
> 
> 2) Disconnect and remove the MC pushrod (don't change it's length adjustment.)
> 
> 3) Remove the pedal cluster and pull out the old cable.
> 
> 4) Feed in the new cable while smearing it with lots of grease.
> 
> 5) Reinstall everything in the reverse order, being careful not to let the 
> clutch pedal fall backwards, which would let the clutch cable fall off the 
> inner hook.


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]