[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 25 Nov 2004 at 12:11, Steven Cooper wrote: > I am not sure about the year of the motor, but can check the number. The MT > air intake distributor I have is P/N 311 133 105E and the ECU is 311 906 > 021D. If any body has a suitable air intake distributor for an AT, I would > be happy to buy it or swap for the MT one I have. Does the year of the FI > system restirct what engine it can be put on? The FI system is a complete > set off an old donor motor, but it may be a different year from the > receipient motor. You can pretty much put any type 3 FI system onto any type 3 engine. The only restriction is that all the FI parts need to "match." The D brain is a '71 brain, which means that you need a full set of '71 FI parts. I have a '71 AT FI intake air distributor if you need one, but finding one down under would be better. If you're planning on putting this on an engine which has the breather box with 2 plastic plugs on top of it, then you should probably also change the breather box and dipstick tube, or you'll have no breather, which will lead to blowby at the rear of the crank. -- ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~