[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On Wed, 2004-11-10 at 16:04, Jim Adney wrote: > > I grok the aux heater boxes, the elbows and the missing small tubes, but what's > different about the tin, other than no holes for the missing small tubes? I'd > expect the tin to just be forward of where the muffler/HEs bolt to the head. Is > the fan housing the same? > I just threw up the pictures of the tin on my web site. http://classicvw.org/gallery/view_album.php?page=1 You can see the difference between the two. The late one is from my '69 parts car. The fan housings are the same except for being 6V. The elbows don't have the little tube. You can see where VW was making running changes, as they have just spotwelded some extra pieces onto the very early single carb tin. And, IIRC, the cooling fan actually has fewer vanes in it. I would like to keep this engine as close to original (on the outside at least) as possible. -- Russ Wolfe '71 FB AT '66 FB MT '64 T34 (not running) '65 T1 (not running) russw@classicvw.org http://www.classicvw.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~