[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] tools to remove a transmission


On 6/9/04 9:00 PM, "Jim Adney" <jadney@vwtype3.org> wrote:

> its correct name, but I've never seen that designation anywhere else. They are
> available at NAPA, and may be called something like an 8mm Torx, or star
> driver. If you ask at the counter they should be able to guide you to the

No, the Torx pattern does not have the right number of points.  You want to
count the number of points... make sure you get the 8-mm 12-point spline
bit.  NOT the same as Torx.  Local hardware might not carry it, but you
should find it at an auto parts store.

-Mark Fuhriman
 '69 Fastback

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]