[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
most of us have had that problem already. the fitting is not part of the injector, just cut it open, replace the hose with a fresh one and put a new clamp on the injector end. hisham 70 sq ----- Original Message ----- From: "Aaron Kunkle" <aaronkunkle@earthlink.net> To: <type3@vwtype3.org> Sent: Sunday, June 06, 2004 12:38 PM Subject: [T3] Leaking FI lines > I let my 72 squareback sit for a little too long and when I finally > started there were several fuel line leaks in the engine compartment. > One was easy to replace but there are 2 more leaks in the little (about > 1 inch) pieces of hose connecting the injector to what looks like a tee > fitting. The line looks crimped onto the injector... can that piece be > replaced or is it a permanent part of the injector? > > Thanks, > Aaron > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org > > ------------------- > [This E-mail scanned for viruses by Surfside Internet.] > > --- > [This E-mail scanned for viruses by Surfside Internet] > > --- [This E-mail scanned for viruses by Surfside Internet]