[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Jim Adney wrote: > > Put the bellows on the body first, then fold it inside the body so it's out of > the way to install the engine. You'll need to put the body side band on before > you do this. If you get everything installed right, you don't need the engine > side band at all. > > When you install the bellows, the large lumps that the bands have to slip under > go on the BOTTOM. > I did it this way and it worked...eventually with a LOT of cussing. The poor original 37 year old boot did not take it so well and now has more than a few rips and tears. None of the tears are over a 1/2 inch wide. Will this hurt cooling by pulling in engine hot air? Steve ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org