[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
>Jacob, the plastic piece goes in the hole, and after that you tap the "peg" >in until its flush. What happens is the "peg" spreads the fingers on the clip >to lock it into place. Thanks for the quick responses, Jim and Bob! Alright, I can see how this works, now my question is do I tap the peg all the way in once I've installed the clips into the holes? Or do I just leave the peg sticking out a bit and have the trim end up pushing it in? I tried both methods, and in most of my holes it's actually too hard to push the peg in all the way before I even attempt to put the strips on. So I'm thinking I may have to drill out the holes a little as you suggested, I'll probably go out tomorrow and get a bit. The thing is when I push really hard to try to get the peg in, the sheet metal either starts to bend, or I have to use so much force that it can't possibly be right... Jacob ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org