[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 31 Aug 2004 at 9:09, Jim Adney wrote: > On 29 Aug 2004 at 23:33, John Jaranson wrote: > > > So.....for grins I put Sophy up on the Livernois Motorsports dyno and > > had them do a couple of pulls. Results were about what I was > > expecting. > > > > Peak HP 46.3 HP at 3900 RPM at the Rear wheels > > Max Torque 69.8 ft-lbs at 3300 rpm One of my manuals shows HP and torque curves. The HP curve peaks at 54 bhp at 4000 rpm, and the torque peaks at 86 ft-lb at 3300 rpm. This is for a bare engine on an engine dyno. I can't help wondering how much loss we should expect in the drive train. -- ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~ Shameless link for search engines: http://listarchive.type3.org ~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~