[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On Sun, 2004-08-22 at 07:22, Daniel Baum wrote: > Hi all, > > I have just obtained an engine "handle", i.e., what on earlier cars was > the engine mount. > > Can someone please let me know with what kind of bolt it is attached? > > From preliminary inspection, it seems the thread in the hole is > stripped, which probably explains why my handle was missing in the first > place. How would I go about fixing this? > > It is an 8mm bolt about 4-5 inches long, with a large thick washer and a lock washer. The threads are in the crankcase breather, behind the fan shroud. I can look around and see if I have one if you want. -- Russ Wolfe '71 FB AT '66 FB MT '65 T1 (not running) russw@classicvw.org http://www.classicvw.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~ Shameless link for search engines: http://listarchive.type3.org ~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~