[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 20 Apr 2004 at 9:37, Mysterious J wrote: > I have to replace my ring compressor, as my cheap old one broke some time > ago. What kind of gear/steering wheel puller will I need; a bolt-on type or > the type with the jaws? I have the bolt-on type. Also, where can I pick up > a gland nut wrench? Probably going to need a flywheel lock too. You need the bolt on type. a 1-7/16" socket works fine on the gland nut. I use one with a 3/4" drive so I don't have to worry about breaking the drive. The same socket fits the rear axle nuts. Watch ebay for a flywheel lock, or use a long steel bar with holes drilled in it to match up with the pressure plate holes. -- Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org