[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] MPS update


On 23 Sep 2003 at 13:51, David V.N. wrote:

> From: "Jim Adney" <jadney@vwtype3.org>

>  > Only the 68-9 FI systems have a microswitch built into the TVS. This one
> makes
> > a click when moving in and out of the idle position. This 68-9 switch has
> a 2- pin connector. Is there also a sensor hanging from
> the underside of the right side intake air runners?
> 
> It's there.Pressure switch ,I think.

> It has just two contacts.

Okay, now we're getting somewhere. At least part of your system is 68-9. The 2 
pin TVS and the Pressure Switch are both 68-9 FI parts ONLY. 70-3 FI got 4 or 5 
pin TVSs and no Pressure Switches.

> > Is there some chance that you have the early switch? Maybe someone has
> cobbled
> > together a mosaic FI system and that may be part of your problem.
> 
> A distinct possibility.Found air deflectors on top of cylinders during
> rebuild!

> We need to figure out what it is before we start throwing parts at it. 

> I would normally agree but my brain was fogged from being engulphed in
> billowing clouds of white smoke!   8^}

;-)

So what brain and PS do you have? Does your FI wiring harness show signs of 
being cobbled up to change to the 2 terminal TVS?

-- 
*******************************
Jim Adney, jadney@vwtype3.org
Madison, Wisconsin, USA
*******************************

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]