[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] Crossbar linkage


On Fri, 2003-09-19 at 10:40, Heather Woltz wrote:
> I finally got the round type cross bar linkage
> together and installed and It seems like the driver
> side throttle arm is being ãforcedä instead of easily
> moving back and forth, also once I go to full throttle
> it does not want to return at all I have to pull it
> back to "idle position". 
> 
> BTW Keep in mind that the car wont start (currently)
> so this is all just preliminary adjusting/testing.
> 
Are these "stock" carbs? If so, check that the bell crank pivot is not
froze/rusted. Also, There should be return springs from the bell cranks,
down to the engine tin.

-- 
Russ Wolfe
'66 FB MT
'71 FB AT 
'65 Bug (not running)
russw@classicvw.org
http://www.classicvw.org




~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]