[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 4 Sep 2003 at 17:02, . : orntar : . wrote: > > -----Original Message----- > > From: Jim Adney [mailto:jadney@vwtype3.org] > > Could be the steering damper, the damper bushing in the Pittman arm, > or the upper sway bar set screw in the LU trailing arm. > > > > I'd check the trailing arm set screw first. > > I took each wheel; and pulled it back and forth but no give and no > noise. I could not identify the trailing arm set screw. what does it > look like, where is it? If you grabbed a front wheel at the top and yanked it back and forth, and there was no looseness, then your trailing arm set screw is fine. That screw is located on the trailing arm where it just comes out of the axle beam. You'll have to take the wheel off to see it. -- ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org