[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
> I went to adjust my timing this morning and found that > at some point, most likely during my last drive, the > oil breather cap had popped off. You can heat the plastic cap (boiling water may do, or a hair-dryer for a bit more heat) and push a broom-stick or similar size to spread the lugs a bit. > My damn pressure sensor hose keeps coming off the air > intake plenum though If there's a bit of spare length to the PS hose, you may find cutting 1/2" off will allow it to grip better. Remember the engine rocks about a bit and the PS is fixed on the body, so you may already have too short a hose length. Over-rich mixture produced by the hose being off might also be the cause of a 'backfire'. Dave. UK VW Type 3 & 4 Club http://www.hallvw.clara.co.uk/ ------ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org