[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] generator pulley - mm wrench size?


<x-flowed>On Friday, May 30, 2003, at 08:57  AM, Mark Seaton wrote:

Since I learnt the error of my ways (those round "teeth" on the fan pulley
sure do invite a prying screwdriver!), I do it more like Dave- use a spanner
on the gen pulley nut and press down on the fan belt to get it to grip-
works one way better than the other but works fine. Its always a bit hard to
get it to go over the compression stroke though.

As long as your pulley nut is tight enough this is the best method. What works even better is to use a 21mm wrench with a built-in ratchet -- that way you never have to reposition the wrench on the nut. Much faster and easier.


Scott
62 343, 65 361

-------------------------------------------------------------------
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org

</x-flowed>
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]