[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] Engine parts - ID help needed


On Fri, 2003-05-16 at 03:18, Edward Morris wrote:
> There's a couple of small items that I need some help
> with identification.  Thanks in advance.
> 
The first is like Phil said. It is the kick down switch for passing gear
in the automatic. It should have a wire coming from the #15 terminal on
the coil, thru a fuse to one of the terminals on the switch. The other
side of the switch goes to the automatic trans under the car following
the dip stick tube to a terminal on the near the dip stick tube.

The second photo is of the early style cold start valve. You don't even
need to worry about this one as only a very few of the early cars got
them, and the ones that didn't worked fine without them.
-- 
Russ Wolfe
'66 FB MT
'71 FB AT 
'65 Bug (not running)
russw@classicvw.org
http://www.classicvw.org



-------------------------------------------------------------------
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]