[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 4 May 2003 at 8:14, Kaz wrote: > > That's not quite right. An AT left axle is 50mm shorter than an AT right. > An AT > > left is 26mm shorter than an MT axle. > > > > The AT left axle will have a "2" stamped on one end. > > > > Do you think that you could get them mixed up? I mean is it possible that > each one will fit opposite sides or is this physically impossible? I have > an automatic and have had the axles off a few times and never noticed any > difference in length just slapped them back together as if they were > irraplaceable. Am i that stupid PO? Or just a Lucky SOB. 50mm is ~2 inches. You couldn't mix them up, so you've just been lucky. It's fortunate that they are enough different that you can't do them wrong. -- ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ------------------------------------------------------------------- List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org