[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 27 Mar 2003 at 11:30, Vlach, Joe -CKHS wrote: > Wow, so a M8 die would cut threads in a hole previously made for a M10 bolt? As > I said, we took the bolt, used a die and found the thread pitch and size. I > don't see how this is possible; perhaps somebody had used the wrong bolt > previously. I don't see how this is possible either. The tap drill size for an M10 x 1.5 is 8.5mm. > So, I should tap these out to a M10 1.5? I will double-check the size and pitch tonight. -- Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ------------------------------------------------------------------- List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org