[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Gary I recently replaced my VM and have not yet properly adjusted it yet. I still have to purchase a high pressure gauge to do this. I did in fact notice that unlike the original Bosch VM it adjusts with a small slot driver though. I have mine adjusted to the best of my ability just from trial and error. I do think they should be adjusted to the Bentley spec though as I will do soon. Cheers Peter Legault >Proper adjustment requires a pressure gauge which you screw into a >particular >port on the R side of the AT, then you adjust that pressure by turning a >screw >with an allen wrench which you reach down the throat of the VM I thought this at first, but no allen wrench would fit in there and its very hard to see in there. Didn't think it could be a screwdriver. I'll try a screwdriver. Thanks. --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.488 / Virus Database: 287 - Release Date: 6/5/2003 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org