[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] brake no mo trouble


On 28 Jun 2003 at 21:32, nathan howell wrote:

> So, I guess what happened is the brakes were sitting too low when I put
> the drum on so there was little adjusting I could do, this also made it
> so the tops of the brakes were too far apart so it took a lot of pumping
> until it would catch. Sound right?

Yes, that sounds right. The parking brake bar gets installed differently on the 
2 sides, because they didn't make mirror image bars. What you did was allow the 
shoes to get centered. You may still need to check the angle of the notches in 
the adjusters. This is important, so don't put it off.

-- 
*******************************
Jim Adney, jadney@vwtype3.org
Madison, Wisconsin, USA
*******************************

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]