[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Thats correct... the .110 females. Did yours say AMP on them near the wings that crimp the insulation?? AMP (TYCO) only makes one version with the tab that they have sold to OEM manuf in europe... so I dont know FOR SURE that these are the correct ones but I used an amp one with no problems that I bought from VW years ago... SO VW supplies AMP, AMP only makes one type... How far off were yours?? The part number is 63241-1, check the tyco site and see if this looks correct. Keith > > Just to clarify, these are the .110" locking female spade connectors, right? > Not the connectors for the ECU end of the harness? > > I have some connectors similar to the former, but I found that the locking tab > is in a different location. They work, but don't lock all the way in the > connector, so I would be glad to buy a couple hundred of the correct ones. You > may have to make REALLY sure that they are the correct ones. > > Mine looked like perfect replacements until I put them side by side. Of course > that only happened when I really needed some! ;-( > > -- > ******************************* > Jim Adney, jadney@vwtype3.org > Madison, Wisconsin, USA > ******************************* > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org > >