[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
hello all, big time delima. had prob. starting engine. 1)I checked spark from both coil, and plugs=(good) 2) gas is good 3) compression is now good after torqing heads and adjusting valves. Car would start so I took apart carb and cleaned etc, floats no longer sticking, it turns out my heads were loose, now their also up to par, before I did all these adjustments I had spark, but NOW I DONT !! I have tried everything possible, new coil, wires, points, I even ran a possitive lead from battery directly to the coil, WHAT GIVES???? B.T.W. this is not T3 related but T2, but you guys are by far more helpful than the T2 list so I thought I'd ask here, (please forgive me :0) Also, if it helps PO had changed ignition switch, which I just took down and it sorta fell apart, I'm not sure if this somehow is related to the problem somehow, is it possible the ignition switch is somehow blocking positive energy to the coil?, even after I ran a possitive lead from battery???? thanx in advance, rob __________________________________ Do you Yahoo!? SBC Yahoo! DSL - Now only $29.95 per month! http://sbc.yahoo.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org