[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] TMI vendor / what else do I need?


> Greg, about the only thing so far that nobodies mentioned is the buttons on
> the seat backs. These are held on with a wire that goes thru the seat and
> attaches with another button. I haven't figured out how you're supposed to
> save them for re-use, but if you need a couple,let me know. I just normally
> cut the wire, but maybe somebody else has come up with a better method. I hope

Yes, you will need to re-use the buttons, but there's no need to cut that
wire.  Compress the headrest by hand, and you'll see that the wire that
holds the buttons can be un-twisted and straightened with needle nose
pliers.  It's just one little twist, I think.

-Mark Fuhriman

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]