[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] Brake Rotor Part NUmber


On 20 Jul 2003 at 1:05, John Jaranson wrote:

> The thickness measured out to 9.5mm which is the same as listed in the
> Bentley.  My Bentley only lists one thickness (9.5mm) for the rotors. 
> Doesn't list a thicker version.  Are the 9.5mm the thicker late rotors?

Okay, I see that now. I have written in 11mm as the new thickness of the late 
rotors.

> Thanks, I have a bearing supply house just up the road from me.  They should
> be able to get them.  They had the bearings for my 6V generator.

Yes, generator bearings are a very common standard bearing, but that place will 
have your wheel bearings, too.  

-- 
*******************************
Jim Adney, jadney@vwtype3.org
Madison, Wisconsin, USA
*******************************

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]