[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 16 Jul 2003 at 20:57, Per Lindgren wrote: > A reinforced rubber tube should work. The stock setup consists of a > plastic Y piece on each side connected via rubber hose to a steel tube > across the front of the engine. Rubber hose pieces are also used to > connect the Y to the manifolds. If needed, I can probably take a few > pics tomorrow (it's dark in about 2 hours, so pics wont be good now) The Y piece was only used on the very last years of the dual carb engines. Most manifolds only got a single connection for the balance pipe, so a simple rubber hose will do the job. -- ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org