[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] Speaking of intake manifolds and balance tubes ...


<x-flowed>A reinforced rubber tube should work. The stock setup consists of a plastic Y piece on each side connected via rubber hose to a steel tube across the front of the engine. Rubber hose pieces are also used to connect the Y to the manifolds. If needed, I can probably take a few pics tomorrow (it's dark in about 2 hours, so pics wont be good now)

PerL
73 Variant L

garram1@swbell.net wrote:

I'm (slowly) working on converting my '68 Sqareback to '67 spec dual carbs. I don't have the balance tube (or the aircleaner). Do I have to find the stock balance tube or can I use something else and if so what else will work? Will reinforced rubber hose work?


Martin Garramone Austin, Texas 1968 Squareback 1968 Westy

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org





</x-flowed>
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]