[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] Hi All!


Thanks for all the advice.
Im located in the UK,  a place called Portsmouth on the south coast :)



-----Original Message-----
From: Jim Adney [mailto:jadney@vwtype3.org] 
Sent: 03 January 2003 20:30
To: Type 3 Mailing List
Subject: Re: [T3] Hi All!

On 3 Jan 2003 at 8:43, Smith, Mycroft wrote:

> Just wanted to say hi, I'm new to the group!

Welcome to the list.

> I am looking for a 12 volt squareback in fairly stock condition, how
> much should I look to pay for a reasonable condition one and where are
> the areas to look out for?

If you're in the US, then everything imported 68 and later was fuel
injected. 
Many of these have been converted to carbs, but this causes problems
more often 
than it solves them. Rust is the biggest problem, so watch for rust-thru
at the 
rear of the front wheelwells and the front of the rear wheelwells. Any
rust in 
the rockers is a bad sign.

If the body is sound, almost anything else can be fixed. Expect to spend
$1000 
to $2500 for a nice car. $2500-$6000 for a really well kept example.
Watch out 
for heavily modified cars as they tend to be hard to maintain since you
don't 
know what they need. (example: what is the correct timing and jetting
for a 
type 3 converted to dual webers and a 009 dist? Answer, you'll have to
figure 
that out on your own, although there are certainly people here who can
give you 
a good start.)

Where are you located?

-- 
Jim Adney
jadney@vwtype3.org
Madison, WI 53711-3054
USA


------------------------------------------------
To unsubscribe, E-mail to: <type3-off@vwtype3.org>
For more help, see http://vwtype3.org/list/

------------------------------------------------
To unsubscribe, E-mail to: <type3-off@vwtype3.org>
For more help, see http://vwtype3.org/list/

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]