[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

[T3] Brake and engine removal Q's


Finished the entire brake system rebuild today with fairly good results.
 The only hang up being I could not figure out why I could not get fluid
to the rear cyl. on each side.  If finally stuck my head in far enough
to realize I'd forgot to replace the rear hoses...doh!  Every hose on
the car was completely blocked.  

Ok question one.  Is the MC rubber stopper that attaches to the fluid
feed line available as a reproduction?  The one I have leaks like crazy.
 The stopper was not included in the NOS rebuild kit I had purchased.

Two:  I've never removed a T3 motor before and was wondering which side
of the cooling air boot you remove when dropping the engine?  The clamp
is on the body side so I loosened that and was guessing that side comes
off first.  I just don't want to rip any more rubber things.  I already
ripped apart the oil filler tube.  BTW are those available??

Thanks!

Steve
'66 fastback

------------------------------------------------
To unsubscribe, E-mail to: <type3-off@vwtype3.org>
For more help, see http://vwtype3.org/list/

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]