[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Jim wrote: >I'm not sure if that part is the same on a 67 as on the 68-73s, but if it is, >then it just snaps into place. To remove it you really have to reach up from >below and squeeze two tabs together, side-to-side, to release it. It's possible >that the rubber seal under it is cracked, or that it is not snapped all the way >down, or that one of the snap tabs has been broken off. Jim, I believe these are all the same. The only difference between my 65 and my 69, is the 65 has a stainless steel cap on top of it. The base is made of plastic. I think you have the right idea though, that either the seal is cracked or the squirter has a broken tab or even not locked into place. Bob 65 Notch S w/ Sunroof 71 Square- now a 2 seat Roadster, under construction Pictures can be seen here; http://photo.starblvd.net/bobnotch ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org