[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
I looked, but I dont have any left in stock at all. Jim, you have any you can get a part number off of? Keith Keith Park Top Notch Restorations topnotch@nycap.rr.com 71 Squareback 65 Notchback 65 Squareback 75 Opel 87 Golf 88 Rx7 10th Anniversary ----- Original Message ----- From: "Jim Adney" <jadney@vwtype3.org> To: <type3@vwtype3.org> Sent: Sunday, December 14, 2003 10:25 PM Subject: Re: [T3] Update: Front torsion arm thrust washers > On 14 Dec 2003 at 11:13, Yancy Everhart wrote: > > > >Grease seals are simply an O ring on the upper arms... no need to search any > > >farther than your hardware store. > > > > The seals I removed are actually V-shaped in cross section with the VW part > > number on them, It seems that an O-ring wouldn't be thick enough, is that > > what you have used? If so, what thickness O-ring did you use? > > The seals I'm familiar with are V-shaped for the lower arms, but thick cross > section O-rings for the uppers. > > -- > ******************************* > Jim Adney, jadney@vwtype3.org > Madison, Wisconsin, USA > ******************************* > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org > >