[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] Update: Front torsion arm thrust washers


On 14 Dec 2003 at 11:13, Yancy Everhart wrote:

> >Grease seals are simply an O ring on the upper arms... no need to search any
> >farther than your hardware store.
> 
> The seals I removed are actually V-shaped in cross section with the VW part
> number on them, It seems that an O-ring wouldn't be thick enough, is that
> what you have used?  If so, what thickness O-ring did you use?

The seals I'm familiar with are V-shaped for the lower arms, but thick cross 
section O-rings for the uppers.
 
-- 
*******************************
Jim Adney, jadney@vwtype3.org
Madison, Wisconsin, USA
*******************************

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]