[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] Injector interchangability?


 
----- Original Message ----- 
From: "Russ Wolfe" <russw@classicvw.org>
 
 
> Yupppp, I agree with Jim on this one. And the pressure regulator should
> be able to go to 40 psi with no problems. I run my '71 1600cc at 32psi
> all the time. The pump is capable of over 65 psi. 

I hadn't thought so but.....well,damn!

> The resistor was a 250 ohm resistor. And I do have one around here if I
> can ever find it.
> If you try to make your own, cut the solid leads short, solder on
> stranded wire leads. Then "Pot" the solder connections in epoxy or
> something similar. Male 1/4" spade connector on one end, and female on
> the other.
 
That I will keep in mind.


"....the whole world , Chico. And everything in it."

David V. Nelson
1969 Fastback FI (no matter what!)
 

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]