[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] shimmey's


Greg Merritt wrote:
> > 	I would look first at the upper torsion bar.  See if the upper
> > torsion arms can slide in & out of the beam as you grab the top of a front
> > tire and push/pull in/out.
 
do i do this with the side i am checking jacked up, or on the ground?
 
Russ wolfe wrote:
> After you check this, check for any oil seepage from the steering
> damper. If there is signs, unbolt the end attached to the beam. Now
> check for any play at all in the movement. Also check the bushing where
> it attaches to the pittman arm.
> 
the damper is about 2 years old, but i have a look see anyhow. thanks.

-- 

nathan
http://www.orntar.net/project/vwt3.html
1970 fastback 

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]