[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
fall off an was nearby. I put the spring back on and put the latch back in. But the same thing happened. I took it out again and
realized that the release shaft (horseshoe) does not fit tightly enough
in its rectangluar opening of the plate. When the spring is attached, the ternsion pulls the shaft out of the opening enough to let the latch spin freely.
Should I weld the latch shaft into opening? Or use some type of chemical bonding?
'71 FI AT Square
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org