Re: [T3] squareback headliner

["Jacob Schroeder" <jacobsquare@hotmail.com>]

<x-flowed>
> The original piece here had a special plastic hooked rib molded onto the
> headliner material. This is just a small triangle of headliner stuff with 
> about
> 10" of the white rib attached.

Yeah, I definately don't have that ... i just have the TMI headliner kit


> Yes, the metal is too stiff to bend and was not intended to. If you don't 
> have
> the original parts you will probably have to wrap the headliner material in
> there and glue it into position.

That's for sure, this sounds like it could be quite difficult, any advice 
besides using a clean putty knife to push the headliner material in there 
once the contact cement has started to firm up?

Thanks,

Jacob

_________________________________________________________________
<b>Get MSN 8</b> and enjoy automatic e-mail virus protection.  
http://join.msn.com/?page=features/virus

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org

</x-flowed>