[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] leaking oil


On 28 Apr 2003 at 15:12, hisham bakr wrote:

> Greetings to all, my 70 sq. started leaking oil recently. not too long
> ago I pulled the motor to replace the clutch and pressure plate and was
> pretty sure the flywheel was dry and the main seal was ok.There is also
> no blow-by. My question is; how likely is it that the oil pump cover is the
> source? I am suspecting either the oil pump cover or the push rod tubes, if it
> is the latter and I have to pull the heads, what else should I get done while am
> there? 

Where do you see the drips: center rear or on the sides?

If you have to pull the heads this would be a good time for a valve job.

-- 
*******************************
Jim Adney, jadney@vwtype3.org
Madison, Wisconsin, USA
*******************************

-------------------------------------------------------------------
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]