[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On Sat, 2003-04-12 at 22:42, Russ wolfe wrote: > Sorry, but I didn't do much body work while working for the dealers. > Didn't pay much attention to the size of those holes. > > I have a couple rear quarter panels out in the garage that I can check > the hole sizes on tomorrow. You are talking about the holes for the belt > trim, and not the trim piece that extends from the rocker panels. > I got out there and checked the diameter of those holes. I measure them as .167" with calipers. But, a #19 (.166") drill won't go through, but a #20 (.161") drill will. I think this may be due to paint build up in the holes. I would think that they are probably 4mm (.160") before paint. These are late style fenders that I got off Jim A. a couple years ago, and have never used. -- Russ Wolfe '66 FB MT '71 FB AT '65 Bug (not running) russw@classicvw.org http://www.classicvw.org ------------------------------------------------------------------- List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org